Whelen 0AC0EDCR Bedienungsanleitung PDF herunterladen

For warranty information regarding this product, visit www.whelen.com/warranty

Form No. 14174 (020108)

ENGINEERING COMPANY INC.

51 Winthrop Road

Chester, Connecticut 06412-0684

Phone: (860) 526-9504

Fax: (860) 526-4078

Sales Email:[email protected]

Canadian Sales:[email protected]

Customer Service:[email protected]

LED Courtesy Light

www. .com

WARNING! All customer supplied wires that connect to the positive terminal of the battery must

be sized to supply at least 125% of the maximum operating current and at the battery to

carry the load. DO NOT USE CIRCUIT BREAKERS WITH THIS PRODUCT!

FUSED

IMPORTANT! Before returning this vehicle to active service, visually confirm proper operation of

this product, as well as all vehicle components/equipment.

NOTE: An optional wire exit hole is

provided on the bottom of the flange if you prefer the wires to exit the bottom of

NOTE: Make sure the Whelen logo on the lens is oriented correctly after mounting.

4. .

Place the assembly onto the mounting surface and mark the location for the two mounting screws

and the wire access hole location between the two screw holes.

sure the installation will not interfere with anything behind the mounting surface.

Drill two pilot holes for the two #4 X 3/8" sheet metal mounting screws and a 3/8” wire access hole. Be sure

to thoroughly deburr this hole and install an appropriately sized grommet (customer supplied).

Feed the wires through the gasket and wire access hole and mount the lighthead using the supplied

mounting screws.

Extend the wires to a switched, 12VDC power source and fuse the positive wire @ 1 amp Test the lighthead

and confirm proper operation

the lighthead.

CAUTION! DO NOT LOOK DIRECTLY AT THESE LEDS

WHILE THEY ARE ON. MOMENTARY BLINDNESS AND/OR

EYE DAMAGE COULD RESULT!

IMPORTANT WARNING!

Wiring

White Wire:

Black Wire:

+12VDC

Ground

Specifications

Input Voltage:

Input Current:

12.8 VDC

30mA (TYP)

CORRECT ORIENTATION

Mounting Hole

for #4 Sheet Metal Screw

(2 plcs.)

3/8" Wire

Hole

1.883"

1.382"

0.660"

0.475"

0.950"

Inhaltsverzeichnis

Seite 1 - 0.950"

Kommentare zu diesen Handbüchern

Keine Kommentare

Whelen 0AC0EDCR Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Für das Auto Whelen 0AC0EDCR herunter. Whelen 0AC0EDCR User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Für das Auto Whelen 0AC0EDCR